Antistatic Bi-Component

Glossary Term

An antistatic bi-component is a type of yarn commonly found in most commercial and household carpets. The term bi-component refers to the co-extrusion of two materials within the same yarn strand. The internal cross-section of the yarn contains carbon while the surrounding fibers are composed of standard insulative nylon. The bi-component yarn provides an overall reduction in static generation—not a path to ground. Because the outer nylon insulates the internal conductive element, bi-component yarns do not discharge or conduct static electricity.

Bi-component yarns help prevent static shocks due to static generation from walking on carpet. These yarns cannot be grounded and are not suitable for static control in areas where computers are used.

Walking Body Voltage

The static charge, in volts, generated by a person walking across the floor. Static charges that accumulate on the body discharge to the first object the person touches, potentially damaging or disrupting sensitive electronics. Learn about how ESD flooring works

Learn More

Voltage Suppression

Voltage suppression occurs when an ESD-protective material, such as a static-dissipative table covering, suppresses static charges rather than dissipating charges to ground. For instance, an ESD laminate with a buried conductive layer will suppress the electrostatic field from a charged object, but is incapable of discharging static even when the charged object touches its surface.

Learn More

Volatile Organic Compounds (VOCs)

Gases emitted from certain solids or liquids, including a variety of chemicals, which may have short- and long-term adverse health effects. Concentrations are consistently higher indoors than outdoors: often up to ten times higher. Flooring should always be tested for VOC content by independent certification organizations like FloorScore and GreenGuard.

Learn More

Triboelectric Series

A list of common materials, such as leather, nylon, wool, and paper, showing whether a material tends to give up or take on electrons when in frictional contact with other materials on the list. Those that give up electrons become positively charged, and materials that accept electrons become negatively charged. In the ESD industry, the

Learn More

Triboelectric Charging

Whenever two objects with different electrical characteristics make contact and separate, the molecules in the two materials interact, forming an electrical bond. Separating the materials creates friction. This frictional force draws electrons away from one material and deposits an excess of electrons on the other, leaving a positive or negative electrical charge on both materials.

Learn More

Total Cost of Ownership

The real cost of a product, encompassing the cost of the material, along with installation, maintenance, anticipated repairs and necessary monitoring. These hidden costs are often overlooked or ignored in the initial cost analysis, but they add up and over time can outpace the expense of owning a floor with a higher material cost. For

Learn More

Ready to Eliminate Static Risk?

When your facility’s protection depends on getting it right the first time, choose
the company with an unmatched track record. We’re standing by to assist you.

Antistatic Bi-Component

Sign up for our newsletter and expert insights.

Walking Body Voltage

Voltage Suppression

Volatile Organic Compounds (VOCs)

Triboelectric Series

Triboelectric Charging

Total Cost of Ownership

Ready to Eliminate Static Risk?