ESD Floor Finishes

SEAL 20.20 is the trusted choice for professionals who demand exceptional performance, lasting protection, and easy maintenance. With its advanced anti-static properties, durable finish, and high gloss, SEAL 20.20 ensures your flooring meets the highest standards of functionality and aesthetics in critical environments.

• Reliable static control: Dissipates static in 0.02 seconds and measures < 10E9 ohms.
• Easy to use: Simply strip old finish and mop on. Use on new or older vinyl or concrete.
• High gloss: Delivers a brilliant shine with 80+ gloss (600 @ 3 coats), enhancing the professional appearance of any space.
• Durable: Resistant to wear, washout, and leaching for long-lasting protection.
• Ease of maintenance: Simplifies upkeep; compatibile with StaticWorx maintenance products.
• Sustainability: Low VOC content (54 grams/liter) supports environmentally conscious facilities.

SEAL 20.20 is ideal for use in:

• Electronics manufacturing facilities
• Computer server rooms
• Data centers
• Command and control centers
• Telecommunications hubs
• Cleanrooms and laboratories

Preparation

• Ensure floor surfaces are at least 60°F and in a humidity-controlled environment (40-60%).
• Strip old finish with a compatible floor stripper before applying SEAL 20.20.

Application

• Apply 2 coats for static-dissipative or conductive tiles. For sealed or polished concrete, apply 3-5 coats for optimal static control.
• Allow 1-2 hours drying time between coats, ensuring no more than three coats are applied within a 24-hour period.

Reapplication and Routine Maintenance

• Sweep or dry mop daily to remove abrasive particles.
• Damp mop regularly with a compatible neutral cleaner to maintain gloss and dissipative properties.

Burnishing Optional

• For enhanced gloss, use a gloss maintainer and burnish with a 1550-2500 RPM burnishing machine.

SEAL 20.20 is a non-hazardous product as defined by 29 CFR 1910.1200. Always read the SEAL 20.20 Safety Data Sheet before use.

Product Specifications

Product Data Sheet

Safety Data Sheet

• Protects Sensitive Electronics – Prevents costly ESD damage to high-tech equipment and components.
• Restores & Maintains Floor Gloss – Keeps your space looking polished and professional, even in high-traffic areas.
• Extends the Life of StaticWorx SEAL 20.20 – Reduces the need for frequent recoating, saving time and money.
• Fast, Easy Application – Dries quickly and works with high-speed burnishers for a hassle-free, streak-free shine.
• Complies with Industry Standards – Designed to meet ANSI/ESD S20.20 & NFPA 99 standards for static-control flooring.
• Simply mop and burnish – No complicated process, no extra steps.
• Works fast – Dries quickly for minimal disruption to operations.
• Long-lasting protection – Keeps floors looking great while preserving anti-static performance.

• Static Dissipation Optimization – Extends anti-static properties of ESD flooring systems to mitigate electrostatic damage to sensitive electronic components.
• High-Performance Gloss Restoration – Restores surface luster while maintaining critical static-control performance.
• Durability Enhancement – Reduces frequency of stripping and recoating, extending the operational life of conductive coatings.
• Easy Application & Fast Drying – Formulated for quick drying with high-speed burnishing equipment (1500-2500 RPM).
• Regulatory Compliance – Meets and exceeds ANSI/ESD S20.20 & NFPA 99 standards for static control flooring.
• VOC Compliant & Biodegradable – Formulated with environmentally safe ingredients, minimizing impact on indoor air quality.

Shine 20.20 is ideal for environments where electrostatic discharge (ESD) protection is critical, including:

• Data Centers & IT Facilities – Prevent downtime by eliminating static-related failures.
• Electronics Manufacturing – Keep sensitive components safe from static discharge.
• Medical & Pharmaceutical Cleanrooms – Maintain a pristine, compliant work environment.
• Telecom & Network Hubs – Protect infrastructure from damaging static buildup.
• Aerospace & Defense – Ensure maximum reliability in high-tech production areas.

Preparation and Cleaning

• Remove dirt and loose debris by sweeping or vacuuming.
• Pre-clean flooring with an ESD-safe neutral detergent to eliminate fine dirt that may embed during burnishing.

Application Procedure

• Dilution: Mix 8 oz per gallon of cold water.
• Application Method: Use a bucketless mop system or a microfiber cleaning or finish applicator for even coverage and damp mop the area to be burnished.
• Drying Time: Allow surface to fully dry before burnishing.
• Burnishing: Use a 1500-2500 RPM burnisher with a white or soft pad under limited pressure or burnishing equipment set to “float.” Burnish areas, making multiple passes to maintain or restore gloss.
• Post-Application Maintenance: Wash and rinse burnishing pads after each use.

Important Notes

• Do not apply under high humidity conditions to prevent hazing.
• Avoid burnishing areas that are still damp to maintain finish integrity.

Product Data Sheet

Product Specifications

Safety Data Sheet

StaticWorx CoatZF ESD floor finish provides superior electrical properties along with a safe walking surface. To ensure employee safety and to mitigate user’s liability exposure, it is important to use floor finish that has been successfully tested for slip resistance, and is properly applied and maintained.

CoatZF can be applied to non-ESD floors and will give non-ESD floors static-dissipative properties. However, like any coating or wax, CoatZF wears off over time. As the coating wears off, any static-dissipative properties the non-ESD floor received from the coating will wear off as well. The only way to be sure your floor is still functioning properly/static dissipative is to test the floor regularly and after every application, using the resistance test method outlined in ANSI/ESD STM7.1.

Note: Some extra high traffic areas may require an initial 3-coat application.

• Zinc-free
• Static dissipative (1 x 10E6 to < 1 x 10E10 ohms) Coating – ANSI/ESD STM7.1 and ESD TR53
• Low tribocharging (<100 volts) coating – ANSI/ESD STM97.2
• 23% Solids- 2 Coat System**
  Reduces labor needed for initial install and on-going maintenance of the floor
• Hard, wear resistant – ASTM Standard D2134.93
• UL listed for slip resistance
• NO APE (alkylphenol ethoxylates) surfactants
• NO Carcinogens, Mutagens, or Reproductive Toxins
• NO Ozone-depleting compounds
• NO Ammonia
• NO Heavy metals (Zinc Free)
• NO Flammable components
• NO Components toxic to aquatic life
• Low VOC
• Meets CARB and other regional VOC requirements
• Lead-free RoHS 2, REACH, and Conflict Minerals Compliant

• 2,000 sq. ft. per gallon, per coat on tile/epoxy (minimum two coats required)
• <2,000 sq. ft. per gallon, per coat on concrete (minimum two coats required)

Best results are obtained when StaticWorx CoatZF static-dissipative floor finish is applied to surfaces which are 60° F. or warmer with relative humidity between 40 – 65%.

1. Remove old finish or wax with StaticWorx EcoScrub Degreaser (stripper). Follow directions on stripper label for application.
2. On initial application, for optimum appearance apply three to five coats of finish. No more than 3 coats should be applied in an 8 hour period.
3. Apply thin, even coats, allowing the finish to dry between coats. Depending on humidity and temperature, dry for 30 – 45 minutes before applying the next coat.

To recoat existing ScrubWorx finish:

1. Vacuum the floor to remove any loose dirt or dust.
2. Wash the floor with StaticWorx ScrubWorx 20.20 to remove dirt and soil.
3. Apply thin, even coats, allowing the finish to dry for approximately 30 minutes before resumption of foot traffic.

The necessary frequency of stripping and refinishing may vary depending on environmental conditions within a particular facility. Field experience indicates that monthly refinishing generally provides optimum results.

A routine maintenance program will provide the most satisfactory gloss retention and wear characteristics in any floor coating. Sweep the floor daily with an untreated mop to remove abrasive loose dirt and sand. Floors should be damp- mopped with StaticWorx ScrubWorx 20.20 regularly, as needed, to remove soil, salt, and film deposits which can degrade the coatings’ conductive properties and gloss.

1. Remove any waxes or polishes from your old floor using StaticWorx EcoScrub floor stripper.
2. Apply 2 coats of CoatZF per our instructions.
3. Measure your floor with our ANSI/ESD S7.1 megohm meter:
   Your floor will measure <1.0 X 10 E9.
4. Test several high traffic areas every 2 weeks.
5. Only clean your floor with StaticWorx ScrubWorx neutral cleaner.

• Concrete
• Epoxy coatings
• Polyurethane Sealers
• VCT, SVT, SDT
• Any ESD tile

Product Specifications

Product Data Sheet

Safety Data Sheet

• Rinse-free formula
• Low foaming
• No 2-Butoxyethanol
• No environmentally toxic preservatives
• No alkyl phenol ethoxylate
• Low odor
• No added fragrance
• No added dyes
• No ammonia
• No inorganic builders
• Not caustic

• 4,000 sq. ft. per gallon (standard 1:10 dilution ration, new & lightly soiled tile).
• 2,000 sq. ft. per gallon (1:5 dilution ratio, heavy soil)

Read the entire label or instruction sheet before using this product.

Recommended for removing StaticWorx static-dissipative floor wax.

1. Dilute (1:4) 32 oz./gal. or 250 mL/L with cold water.
2. Apply solution liberally with mop.
3. Allow 4 – 5 minutes contact time. Be sure to keep surface wet at all times. Agitate with a low-speed rotary machine or automatic scrubber (using a stripping pad or brushes).
4. Pick up solution using a wet vacuum or automatic scrubber and rinse thoroughly.
5. Allow floor to dry completely.
6. Please dispose of this product and waste generated from this product in accordance with all applicable local, state, and Federal regulations.

PRECAUTIONS: Keep Out Of Reach Of Children

Download safety data sheet