StaticWorx Stripper / Degreaser

Formulated for floor care professionals whose time is at a premium.

StaticWorx EcoScrub Stripper / Degreaser

EcoScrub Degreaser removes heavy build-up of UHS and urethane-fortified finishes. Years of buildup can be quickly and easily removed by light agitation with a scrubbing machine and standard stripping pad. EcoScrub Degreaser will even dissolve almost impossible-to-remove straight acrylic sealers.

We recommend our EcoScrub Floor Stripper for removing StaticWorx CoatZF static-dissipative floor finish. It will also remove other non-zinc cross-linked floor finishes. This low odor formula is easy to work with and does not require rinsing.

Specially designed for use with ESD – and non ESD – vinyl tiles or roll goods.

With low levels of volatile organic compounds, biodegradability and ultra-low toxicity, our EcoScrub stripper/degreaser exceeds nationally accepted green standards.

Buy Now

Rinse-free formula
Low foaming
No 2-Butoxyethanol
No environmentally toxic preservatives
No alkyl phenol ethoxylate
Low odor
No added fragrance
No added dyes
No ammonia
No inorganic builders
Not caustic

4,000 sq. ft. per gallon (standard 1:10 dilution ration, new & lightly soiled tile).
2,000 sq. ft. per gallon (1:5 dilution ratio, heavy soil)

Read the entire label or instruction sheet before using this product.

Recommended for removing StaticWorx static-dissipative floor wax.

Dilute (1:4) 32 oz./gal. or 250 mL/L with cold water.
Apply solution liberally with mop.
Allow 4 – 5 minutes contact time. Be sure to keep surface wet at all times. Agitate with a low-speed rotary machine or automatic scrubber (using a stripping pad or brushes).
Pick up solution using a wet vacuum or automatic scrubber and rinse thoroughly.
Allow floor to dry completely.
Please dispose of this product and waste generated from this product in accordance with all applicable local, state, and Federal regulations.

Color	Water White
Fragrance	Mild
pH Concentrate	10.5
pH at Dilution	10.0
Shelf Life	1 year
Residue at Evaporation	None

PRECAUTIONS: Keep Out Of Reach Of Children

Download safety data sheet

What Clients are Saying

Carpet installation went silky smooth. Fast, clean, and the system performed exactly as expected.

Chris Ervin, Director of Architectural Interiors LEED AP

We are 10 months in our new facility. We had damaged several floor tiles during the move but I will say replacing them was painless. Our facility guy wasn’t overly excited with the decision of going with the tile over the epoxy floor but now that he has had a chance to work with it he is glad we went with the tile. We worked with our cleaning crew and have worked out a cleaning/polishing process that really shows off the floor. It was a pleasure working with both of you on the project.

John Hare, Director of Facilities EIT, LLC

We chose AmeriWorx SVT for our facility’s 32,000 sq. ft. production floor because we wanted the ultra-clean white look and great aesthetics realized with vinyl flooring as well as the excellent ESD protection offered with conductive tile.

Kim Boykin, VP of Operations Fawn Electronics, Nashville NC

Explore Our StaticWorx Cleaning Supplies

Floor Cleaners

Static-dissipative floors require routine cleaning to maintain both appearance and electrical performance. StaticWorx floor cleaners are specially formulated to remove everyday dirt, dust, and residue without leaving insulating films that interfere with static control. Designed for use on ESD vinyl, rubber, epoxy, carpet tile, and concrete surfaces, these cleaners lift contaminants while preserving direct contact between footwear and the conductive elements of the floor—ensuring reliable ESD protection day after day.

Explore

ESD Floor Finishes

StaticWorx ESD floor finishes provide a durable, high-gloss protective layer while maintaining consistent static-dissipative performance. Unlike conventional waxes, these finishes are specifically designed for use on ESD flooring systems and can be replenished without degrading electrical properties. Ideal for high-traffic environments, StaticWorx finishes enhance appearance, simplify maintenance, and help extend the life of your ESD floor—all without risking warranty or performance.

Explore

Tile RESTORE

RESTORE™ Cleaning Products are engineered to refurbish worn ESD solid vinyl tile (SVT) without wax or coatings. This proven system removes embedded contaminants, restores gloss, and preserves the floor’s electrical performance—bringing ESD vinyl tile back to a clean, like-new condition while extending floor life and avoiding the cost and risk of waxing or replacement.

Explore

Buffing Pads

StaticWorx ESD buffing pads are engineered for use with ESD floor cleaning and restoration products to safely remove soil, finishes, and embedded contaminants without damaging the floor or compromising electrical performance. Available in gray for light-to-moderate cleaning and maroon for deeper scrubbing and restoration, these pads deliver consistent coverage, controlled abrasion, and reliable results as part of routine maintenance or the RESTORE™ cleaning process.

Explore

ESD Urethane & Epoxy Coatings

StaticWorx ESD urethane and epoxy coatings protect electronic equipment from damage caused by electrostatic discharge – at the same time sealing your floor so you don’t have to worry about contaminants, germs or bacteria accumulating in cracks, seams or other invisible places.

Explore

StaticWorx Stripper / DegreaserFrequently Asked Questions

What is EcoScrub ESD Floor Stripper/Degreaser?

EcoScrub is a low-odor, rinse-free floor cleaner designed to remove heavy buildup of UHS and urethane-fortified finishes, including StaticWorx CoatZF static-dissipative floor finish, as well as other acrylic sealers.

Is it safe for ESD flooring?

Yes. EcoScrub is formulated for ESD and non-ESD vinyl tiles or roll goods, biodegradable, ultra-low toxicity, and exceeds nationally accepted green standards.

How do I use EcoScrub?

Dilute 1:4 (32 oz./gal. or 250 mL/L) with cold water.
Apply liberally with a mop and keep the surface wet for 4–5 minutes.
Agitate with a low-speed rotary machine or automatic scrubber.
Pick up solution with a wet vacuum or automatic scrubber and rinse if needed.
Allow floor to dry completely.

What are the key benefits?

Rinse-free formula
Low foaming, low odor
No harsh chemicals such as 2-Butoxyethanol, ammonia, dyes, or fragrances
Environmentally safe and non-caustic

What coverage can I expect?

Light soil / new tile: ~4,000 sq. ft. per gallon (1:10 dilution)
Heavy soil: ~2,000 sq. ft. per gallon (1:5 dilution)

Are there safety precautions?

Yes. Keep out of reach of children. EcoScrub can cause serious eye damage and skin irritation — always follow the label and SDS instructions for safe handling and disposal.

View More FAQs

Ready to Eliminate Static Risk?

When your facility’s protection depends on getting it right the first time, choose
the company with an unmatched track record. We’re standing by to assist you.